Payment & Shipping Terms:
|Package:||Woden Box, Container||Slot Size:||1.0 Mm|
|Material:||Stainless Steel||Diameter:||10 ",273mm|
|End Connection:||Wleded Rings|
johnson screen pipe,
sand control screens
Pure Round Water Well Sand Screen Non - Angular Corner 5.8M Length
Johnson Wire Screen Product Description:
Johnson Screens is manufactured with V-shaped profile wire which is spirally wound around a cage of longitudinal support rods. Each intersecting point of these wires is fusion welded. The pitch of winding gives different spacing between two adjacent turns of wire. This spacing gives passage for water to enter. The entire process is completed on fully computerized machines.
Johnson Wire Screen Specificarion:
|O.D||Min. 32mm Max.1270mm|
|Size||2" 3" 4" 5" 6" 8" 9" 10" 12" 14" 16"|
|Solt size||0.1-30 mm|
|End connection||Welded rings/ Nothing / Thread coupling|
|Wire size||63# 93 # 118#|
|Support rod||120# 140 # 170# 200#|
|Wire shape||V shape|
Johnson Wire Screen Characteristic:
1. Screens with high open area are more suitable for the construction of high-quality water wells, oil wells and gas wells.
2. Low cost operation Screens with high open area shall favor groundwater infiltration. Abundant water shall reduce the water level’s down, thus to save energy consumption.
3. Reduce the abrasion of the pump
Under the same condition, high open area can make the speed of groundwater’s entering into the screen much slower than any other filtration apparatus, which will avoid sand’s entering into screen because of high pressure, thus reduce the abrasion of the pump.
4. Extend the life span of wells
Comparatively, groundwater’s entering into screen with higher open area is much easier than the entering into lower open area screen. The slow water flow shall extend the life span of wells.
Johnson Wire Screen Regular Specification:
Johnson Wire Screen Use:
water supply systems
Refining & petrochemical
Johnson Wire Screen OEM service:
We can produce products according to the needs of our customers.
Material: stainless steel 304, 316L, low carbon steel
Diameter: minimum diameter 32mm, maximum diameter 1270mm
Length: single tube can be up to 6 meters in length
Gap: 0.25mm, 0.5mm, 0.7mm, 1.0mm, 1.5mm is a regular gap. We can produce gaps of 0.1-50mm
Joints: Generally, there are joints at both ends of the pipe, such as flanges, weld rings, or threads, so that the pipes can be connected to meet the needs of use.
Johnson Wire Screen Pictures:
Contact Person: Kate Hu