|
Product Details:
Payment & Shipping Terms:
|
| Name: | Water Well Screen | Material: | Low Carbon Galvanized |
|---|---|---|---|
| Diameter: | 8-5/8" | Slot Size: | 1.0mm |
| Length: | 5.8m | Wire: | 3*6.5mm |
| Support Rod: | ø4.2mm | No. Of Rods: | 48NOS |
| Ends: | Bevel Welded Rings | Usage: | Water Well /oil Well /filter |
| Highlight: | 8-5/8" water well screen pipe,1.0mm slot water well screen pipe,low carbon johnson water well screens |
||
Water well screen is a filtering device that connects to the bottom length of the casing.
It allows water to flow into the well while keeping most sand and gravel out.
A water well screen is important in all wells that are completed in an unconsolidated aquifer.
Water well screen is manufactured by wrapping a shaped wire around an internal array of longitudinal rods and are joined by resistance welding. Screen sections are usually twenty feet long. Most water well screen is manufactured from stainless steel rather than carbon steel in order to avoid problems which often lead to accelerated corrosion.
|
Name: Water well screen,Water wire screen, Johnson screen,Wire warp screen,Wedge wire screen,Screen tube,Slotted tube,Wound screen,Continuous slot screen filter,Sand control screen, Wedge wire screen,Oil screen. |
|||||||
|
Material: Stainless steel 304,316L,Non-magnetic Stainless steel, Low carbon galvanized,904L,Duplex steel etc. |
|||||||
|
Diameter: From 29-1300mm (Normal diameter is in the below table) |
|||||||
|
Slot: From 0.1-100mm (Normal slot 0.5mm, 0.63mm, 0.75mm, 1.0mm, 1.5mm, Pls refer to below table) |
|||||||
|
Length: From 100-6000mm (Normal length is 2.9m and 5.8m, to fit container) |
|||||||
|
Wrap wire:2*3.5mm,2.2*3.5mm,2.2*4.5mm,3*4.6mm,3*5mm,3*6mm,3*6.5mm,3.2*6mm,4*7mm etc. |
|||||||
|
Support rod:ø3.0-ø6.0mm round wire, Also can be Vee-shaped wire. |
|||||||
|
Ends:Welded rings/Plain beveled ends,Male/female threaded,Flange etc. |
|||||||
|
Use:Water Well,Waste Water Treatment,Water supply systems,Coal & Mine,Food Processors & Beverage Screens,Environmental protection,Refining & Petrochemical,Architecture & Construction etc. |
|||||||
|
Sizes (inch) |
OD (mm) |
Slot (mm) |
Length (m) |
Tenslie Strength |
Collapse Strength |
Wrap wire Vee-shaped wire(mm) |
Support rod Round wire(mm) |
|
3-1/2 |
88.9 |
1.0 |
2.9 |
＞22 |
10.2 |
2.2*3.5 (Width*height) |
ø3.8MM×22 |
|
4-1/2 |
114.3 |
1.0 |
2.9 |
＞28 |
11.5 |
2.2*3.5(Width*height) |
ø3.8MM×22 |
|
6-5/8 |
168.3 |
0.75 |
5.8 |
＞40 |
12.8 |
2.2*3.5(Width*height) |
ø3.8MM×32 |
|
6-5/8 |
168.3 |
1.0 |
5.8 |
＞33 |
12.8 |
2.2*3.5(Width*height) |
ø3.8MM×32 |
|
6-5/8 |
168.3 |
0.63 |
5.8 |
＞83 |
45 |
3.2*6.0(Width*height) |
ø6.0MM×32 |
|
8-5/8 |
219.1 |
1.0 |
5.8 |
＞34 |
21.9 |
2.3*3.5(Width*height) |
ø3.8MM×48 |
|
8-5/8 |
219.1 |
1.0 |
5.8 |
＞50 |
38.2 |
3.0*5.0(Width*height) |
ø4.0MM×48 |
|
8-5/8 |
219.1 |
1.0 |
5.8 |
＞60 |
46 |
3.2*6.0(Width*height) |
ø5.0MM×48 |
|
10-3/4 |
273.1 |
0.75 |
5.8 |
＞50 |
32.9 |
2.2*3.5(Width*height) |
ø4.0MM×55 |
|
10-3/4 |
273.1 |
1.0 |
5.8 |
＞60 |
39.5 |
3.0*4.6(Width*height) |
ø4.8MM×55 |
|
10-3/4 |
273.1 |
1.0 |
5.8 |
＞100 |
48 |
3.2*6.0(Width*height) |
ø5.0MM×55 |
|
12-3/4 |
323.9 |
1.0 |
5.8 |
＞120 |
37.2 |
3.0*5.0(Width*height) |
ø4.0MM×56 |
|
14 |
355.6 |
1.0 |
2.9 |
＞80 |
37.8 |
3.0*5.0(Width*height) |
ø4.0MM×59 |
|
16 |
426 |
1.0 |
2.9 |
＞80 |
37.5 |
3.0*5.0(Width*height) |
ø4.0MM×54 |
1. It has high mechanical strength, can bear large pressure drop;
2. It has equal slots for filtering, can form equally distributed filter cake, easy to clean for reusing;
3. The wedge type slot can improve backflushing and regeneration performance ;
4. It has resistance for pressure, temperature, aging,corrosion, can be applied for different kinds of fluid .
Contact Person: Mrs. Orange Song
Tel: 008613903185920
Fax: 86-318-7565919
