|
Product Details:
Payment & Shipping Terms:
|
| Name: | Water Well Screen | Material: | Low Carbon Galvanized |
|---|---|---|---|
| Diameter: | 8" | Slot Size: | 0.75mm |
| Length: | 5.8m | Wire: | 3*6.5mm |
| Support Rod: | ø4.2mm | No. Of Rods: | 48NOS |
| Ends: | Bevel Welded Rings | Usage: | Water Well /oil Well /filter |
| Weight: | 147KG/piece | Use: | In Water Wells For Sand Control |
| High Light: | 8" well screen pipe,beveled welded ring well screen pipe,8 inch water well screen |
||
A water well screen is a filtering device that connects to the bottom length of the casing.
It allows water to flow into the well while keeping most sand and gravel out.
A water well screen is important in all wells that are completed in an unconsolidated aquifer.
|
Name: Continuous Water well screen, Wire warp screen,Wedge wire screen,Screen tube,Slotted tube, Wound screen,Continuous slot screen filter,Sand control screen, Wedge wire screen,Oil screen. |
|||||||
| Material: Stainless steel 304,316L,Non-magnetic Stainless steel, Low carbon galvanized,904L,Duplex steel etc. | |||||||
| Diameter: From 29-1300mm (Normal diameter is in the below table) | |||||||
| Slot: From 0.1-100mm (Normal slot 0.5mm, 0.63mm, 0.75mm, 1.0mm, 1.5mm, Pls refer to below table) | |||||||
| Length: From 100-6000mm (Normal length is 2.9m and 5.8m, to fit container) | |||||||
| Wrap wire:2*3.5mm,2.2*3.5mm,2.2*4.5mm,3*4.6mm,3*5mm,3*6mm,3*6.5mm,3.2*6mm,4*7mm etc. | |||||||
| Support rod:ø3.0-ø6.0mm round wire, Also can be Vee-shaped wire. | |||||||
| Ends:Welded rings/Plain beveled ends,Male/female threaded,Flange etc. | |||||||
|
Use:Water Well,Waste Water Treatment,Water supply systems,Coal & Mine,Food Processors & Beverage Screens,Environmental protection,Refining & Petrochemical,Architecture & Construction etc. |
|||||||
|
Sizes (inch) |
OD (mm) |
Slot (mm) |
Length (m) |
Tenslie Strength |
Collapse Strength |
Wrap wire Vee-shaped wire(mm) |
Support rod Round wire(mm) |
| 3-1/2 | 88.9 | 1.0 | 2.9 | ＞22 | 10.2 | 2.2*3.5 (Width*height) | ø3.8MM×22 |
| 4-1/2 | 114.3 | 1.0 | 2.9 | ＞28 | 11.5 | 2.2*3.5(Width*height) | ø3.8MM×22 |
| 6-5/8 | 168.3 | 0.75 | 5.8 | ＞40 | 12.8 | 2.2*3.5(Width*height) | ø3.8MM×32 |
| 6-5/8 | 168.3 | 1.0 | 5.8 | ＞33 | 12.8 | 2.2*3.5(Width*height) | ø3.8MM×32 |
| 6-5/8 | 168.3 | 0.63 | 5.8 | ＞83 | 45 | 3.2*6.0(Width*height) | ø6.0MM×32 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | ＞34 | 21.9 | 2.3*3.5(Width*height) | ø3.8MM×48 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | ＞50 | 38.2 | 3.0*5.0(Width*height) | ø4.0MM×48 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | ＞60 | 46 | 3.2*6.0(Width*height) | ø5.0MM×48 |
| 10-3/4 | 273.1 | 0.75 | 5.8 | ＞50 | 32.9 | 2.2*3.5(Width*height) | ø4.0MM×55 |
| 10-3/4 | 273.1 | 1.0 | 5.8 | ＞60 | 39.5 | 3.0*4.6(Width*height) | ø4.8MM×55 |
| 10-3/4 | 273.1 | 1.0 | 5.8 | ＞100 | 48 | 3.2*6.0(Width*height) | ø5.0MM×55 |
| 12-3/4 | 323.9 | 1.0 | 5.8 | ＞120 | 37.2 | 3.0*5.0(Width*height) | ø4.0MM×56 |
| 14 | 355.6 | 1.0 | 2.9 | ＞80 | 37.8 | 3.0*5.0(Width*height) | ø4.0MM×59 |
| 16 | 426 | 1.0 | 2.9 | ＞80 | 37.5 | 3.0*5.0(Width*height) | ø4.0MM×54 |
1. The continuous water well screen adopts the world's advanced full-wound welding production process, and is made of special trapezoidal wire and triangular wire windings welded on a set of supporting wires arranged in a circle. Full-process welding, the wire is connected to the support rod by electric welding, which ensures the strict continuous integrity of the product, so that it forms an ideal gap size and has the performance of maximum high pressure.
2. The production of continuous water well screen can be made of different raw materials according to different needs, mainly including: 304 type and 316 type stainless steel, Monel copper-nickel alloy, galvanized or ungalvanized low carbon steel and Thermoplastic materials, mainly polyvinyl chloride and acrylonitrile-butadiene-styrene or alloys based on them. Some other highly specialized materials are available for particularly aggressive water quality.
3. The slit opening of the continuous water well screen is formed by the continuous winding of the wire to form the ideal gap size. The whole process is monitored by the computer console, and the entire production process is manually supervised. Each production link is used by professional production personnel. Advanced and sophisticated professional equipment for production. The individual slot spaces of continuous water well screen can vary during manufacture. In fact, even a single section of the screen can be made with different sized gaps when the geological requirements become worse. This is conducive to the maximum application of the hydraulic conductivity of each layer. Each production link of this product is produced by professional production personnel using advanced and sophisticated professional equipment. Product specifications and raw materials can be specially customized according to customer needs. All products are strictly inspected in accordance with authoritative product standards to ensure product quality, thereby ensuring the interests of our customers and obtaining the highest production efficiency with the most economical investment.
Contact Person: Mrs. Orange Song
Tel: 008613903185920
Fax: 86-318-7565919
