|
Product Details:
Payment & Shipping Terms:
|
| Name: | Sand Control Wedge Wire Screen | Material: | AISI 304 |
|---|---|---|---|
| Diameter: | 216mm | Length: | 2038mm |
| Slot Size: | 1.0 Mm | Wire Size: | 3*4.6mm Vee Wire |
| Support Rod: | 3*6.2mm Vee Wire | End Connection: | Male/female Threaded |
| Surface: | Plolished | Package: | Wooden Boxes |
| High Light: | Sand Control wedge wire screen,OD 216mm wedge wire screen,Water Well wedge wire screen |
||
AISI 304 O.D 216mmn Sand Control Wedge Wire Screen Used In Water Well
Sand Control Wedge Wire Screen Description:
High Strength Sand Control Wedge Wire Screen which is spirally wound around a cage of longitudinal support rods.
Each intersecting point of these wires is fusion welded.
The pitch of winding gives different spacing between two adjacent turns of wire.
Sand Control Wedge Wire Screen Specificarion:
| Name | Sand Control Wedge Wire Screen |
| Material | Stainless steel |
| Grade | 304 |
| O.D | 216mm |
| Size | 8" |
| Length | 2038mm |
| Solt size | 1.0 mm |
| End connection | Male/female threaded |
| Wire size | 3*4.6mm VEE wire, 3mm is the width and 4.6mm is the height |
| Support rod | 3*6.2mm VEE wire, 3mm is the width and 6.2mm is the height |
| Wire shape | Vee-shaped ( width* height ) |
Sand Control Wedge Wire Screen Regular Specification:
|
SIZE (INCH) |
O.D (MM) |
SLOT (MM) |
LENGTH (M) |
COLLAPSE STRENGTH (BAR) |
TENSILE WEIGHT (TON) |
WRAP WIRE(WIDTH*HEIGHT) (MM) |
RODS (MM) |
| 3-1/2 | 88.9 | 1.0 | 3 | ＞22 | 10.2 | 2.3*3.5 | 3.8MM/22 |
| 4-1/2 | 114.3 | 1.0 | 3 | ＞28 | 11.5 | 2.3*3.5 | 3.8MM/22 |
| 6-5/8 | 168.3 | 0.75 | 5.8 | ＞40 | 12.8 | 2.3*3.5 | 3.8MM/32 |
| 6-5/8 | 168.3 | 1.0 | 5.8 | ＞33 | 12.8 | 2.3*3.5 | 3.8MM/32 |
| 6-5/8 | 168.3 | 0.63 | 5.8 | ＞83 | 45 | 3.2*6.0 | 6.0MM*32 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | ＞34 | 21.9 | 2.3*3.5 | 3.8MM/48 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | ＞50 | 38.2 | 3.0*5.0 | 4.0MM/48 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | ＞60 | 46 | 3.2*6.0 | 5.0MM/48 |
| 10-3/4 | 273.1 | 0.75 | 5.8 | ＞50 | 32.9 | 2.3*3.5 | 4.9MM/55 |
| 10-3/4 | 273.1 | 1.0 | 5.8 | ＞60 | 39.5 | 3.0*5.0 | 4.9MM/55 |
| 10-3/4 | 273.1 | 1.0 | 5.8 | ＞100 | 48 | 3.2*6.0 | 5.0MM/55 |
| 12-3/4 | 323.9 | 1.0 | 5.8 | ＞120 | 37.2 | 3.0*5.0 | 4.0MM/50 |
| 14 | 355.6 | 1.0 | 3 | ＞80 | 37.8 | 3.0*5.0 | 4.0MM/59 |
Sand Control Wedge Wire Screen Characteristic:
1. Sand Control Wedge Wire Screen with high open area are more suitable for the construction of high-quality water wells, oil wells and gas wells.
2. Low cost operation Screens with high open area shall favor groundwater infiltration.
Abundant water shall reduce the water level’s down, thus to save energy consumption.
3. Reduce the abrasion of the pump
Under the same condition, high open area can make the speed of groundwater’s entering into the screen much slower than any other filtration apparatus, which will avoid sand’s entering into screen because of high pressure, thus reduce the abrasion of the pump.
4. Extend the life span of wells
Comparatively, groundwater’s entering into screen with higher open area is much easier than the entering into lower open area screen. The slow water flow shall extend the life span of wells.
Sand Control Wedge Wire Screen Use:
water well
water supply systems
Refining & petrochemical
Filter equipment
Sand control
Contact Person: Mrs. Orange Song
Tel: 008613903185920
Fax: 86-318-7565919
